Search
Filters

Audio Production Equipment

Filter by attributes
  • 1/8-inch mini-jack stereo input impedance
  • 10
  • 1/8-inch mini-jack stereo input maximum total gain
  • 17
  • 1/8-inch mini-jack stereo input sensitivity
  • 5.5
  • Activation Response Time
  • 25
  • AES/EBU Output Impedance
  • 110
  • Audio Input Gain Control Range
  • 35
  • Audio Input Peak
  • 25
  • Audio inputs minimum sensitivity
  • -20
  • Audio inputs peak input level
  • 16
  • Aux send 1/4-inch output impedance
  • 100
  • Balanced input impedance (analog failover inputs)
  • 8
  • Balanced nominal input impedance
  • 20
  • Balanced Output Impedance
  • 150
  • BATTERY DURATION
  • 15
  • Bit Depth Supported
  • 24
  • Channel/Master gain controls
  • 14
  • Compressor Threshold
  • 3
  • Control Surface Depth (without flight case)
  • 28.5 in
  • Control Surface Height (without flight case)
  • 12.8 in
  • Current Drain (Phantom Power Off)
  • 40
  • Current Drain (Phantom Power On)
  • 80
  • Digital-to-Analog, Analog-to-Digital Conversion
  • 24
  • Electronically Balanced Output Maximum
  • -20
  • Electronically Balanced Output Standard
  • -36
  • Equivalent Input Hum and Noise
  • -123
  • FAST AGC response
  • 3
  • Frequency response (20Hz-20kHz)
  • 1
  • Headphone Power Amplifier Outputs Maximum
  • 100
  • HF output power
  • 50
  • High-frequency power amplifier rated load impedance
  • 6
  • High-frequency power amplifier rated power(at 1 kHz with 1% THD)
  • 100
  • 40
  • Input Impedance (nominal) balanced
  • 10
  • Input Impedance (nominal) unbalanced
  • 5
  • Input Impedance (nominal)Line
  • 10
  • Input Impedance (nominal)Mic
  • 2.2
  • Input Impedance Line
  • 20
  • Input Signal Maximum Level
  • 3
  • Level Electronically Balanced Output Maximum
  • 20
  • Level Electronically Balanced Output Standard
  • 4
  • LF output power
  • 80
  • Line Input - Standard
  • 4
  • Line Input and Stereo Return Impedance
  • 10
  • Line Output Level (nominal)
  • 1
  • Line/Aux Hi setting Max Input Level
  • 6
  • Line/Aux Low setting Max Input Level
  • 22
  • Local Rack Power Consumption
  • 140
  • Low Input Equalization
  • 80
  • Lower Cutoff Frequency
  • 3
  • Low-frequency power amplifier rated (at 1 kHz with 1% THD)
  • 100
  • 150
  • Low-frequency power amplifier rated load impedance
  • 4
  • Main unbalanced L/R stereo outputs impedance
  • 100
  • Mains Power Consumption
  • 100
  • Max. Carrying Current
  • 3
  • Max. Switching Current
  • 2
  • Max. Switching Power
  • 60
  • Maximum aux send 1/4-inch output
  • 23
  • Maximum Inplut Signal Line
  • 25
  • Maximum Input Levels:
  • 15
  • Maximum Input Signal
  • 22
  • Maximum main unbalanced L/R stereo outputs
  • 17
  • Maximum Mic Gain
  • 60
  • Maximum Output Level Balanced Output
  • 20
  • Maximum Output Level Unbalanced Output (3.5mm)
  • -19
  • Maximum Output Level(Unbalanced)
  • 0
  • Maximum Rated Output, Bridged, 4-ohm, 8-ohm
  • 120
  • Maximum Rated Output, Bridged, 70V/100V
  • 120
  • Maximum rated output, single channel driven, 70V/100V constant voltage
  • 300
  • Maximum stereo RCA tape outputs
  • 14
  • Maximum Voltage Gain
  • 108
  • Meters Standard Level
  • 0
  • Mic 1 - Maximum
  • 4
  • Mic Input (maximum gain) to local line out THD+Noise
  • 0.02
  • MIC Input Level HIGH
  • -3
  • MIC Input Level LOW
  • -20
  • MIC1/MIC2 Hi setting Max Input Level
  • -16
  • MIC1/MIC2 Low setting Max Input Level
  • 0
  • Minimum Input Level
  • -18
  • Minimum Input Levels:
  • -18
  • Minimum Mic Gain
  • 5
  • Minimum Operational Load
  • 2
  • 5
  • Mix, Group and Aux Output Impedance
  • 150
  • Mix, Group, Aux, Matrix and Direct Output Impedance
  • 150
  • Mixer High EQ (±15dB)
  • 12
  • Mixer Low EQ (±15dB)
  • 90
  • Mixer Mid EQ (±15dB)
  • 2
  • Monitor Out- Max
  • 1
  • Monitor Output 3.5mm Stereo
  • -4
  • Mono input channel trim control
  • 40
  • Mono Input Impedance
  • 35
  • Muting Response
  • 15
  • Noise Level Left Right Channel
  • -120
  • Noise Level(Left Right Channel)
  • -110
  • Off-Attenuation
  • 13
  • Output Level
  • 4
  • Output Power, 4 ohms, Both Channels Driven
  • 125
  • Output Power, 8 ohms, Both Channels Driven
  • 105
  • Output Signal (normal rated)
  • 10
  • 4
  • Output Signal Maximum Power
  • 100
  • Output to module
  • 24
  • Outputs (3)
  • 4
  • Phantom Power Voltage
  • 48
  • Phantom Voltage
  • 48
  • Phones Output(3.5mm Stereo)
  • -3.5
  • Power Requirement
  • 24
  • Quiescent (idle) power consumption
  • 18
  • 20
  • Relay Release Delay
  • 0.5
  • Sample Tone Freq
  • 1
  • Sampling Frequency
  • 48
  • Signal-To-Noise Balanced Output
  • -120
  • SLOW AGC response
  • 8
  • Stagebox Mic Input (maximum gain) to local line out THD+Noise
  • 0.02
  • Stagebox Power Consumption
  • 140
  • Standby mode power consumption
  • 12
  • 8
  • Stereo line mixer outputs impedance
  • 600
  • Stereo RCA tape output impedance
  • 1
  • Transducers high-frequency driver sensitivity (2.83V, 1m)
  • 91
  • Transducers low-frequency driver sensitivity (2.83V, 1 m)
  • 89
  • 91
  • Unbalanced Nominal Input Impedance
  • 10
  • Unbalanced Output Impedance
  • 75
  • Unbalanced Output Maximum
  • -20
  • Unbalanced Output Standard
  • -36
  • Upper Cutoff Frequency
  • 3
  • Currently shopping by:
  • Input Impedance (nominal)RCA: 10
  • Memory (RAM) Required: 28.4
  • Signal to Noise Ratio: 114

Filter by:

Clear All