Search
Filters

Microphones

Filter by attributes
  • Adjustable Gain Range
  • 40
  • Amplifier Audio Output Power
  • 20
  • Amplifier REC output Level
  • 360
  • Amplifier Signal-to-noise Ratio
  • -75
  • Amplifier Speaker Load
  • 4
  • Battery Current Drain
  • 0.5
  • Bidirectional Sensitivity (at 1kHz)
  • -36
  • Camera Output Impedance
  • 47
  • Cardioid Sensitivity (at 1kHz)
  • -31
  • Channel Band (Space)
  • 1
  • Common Mode Rejection (10 Hz to 100 kHz)
  • 45
  • 45
  • Delta-sigma Sensitivity (with MKH 8020)
  • -31
  • Dual Microphone Rated Impedance
  • 150
  • Dual Microphone Rating Impedance
  • 150
  • Dynamic Range (1k ohms load at 1 kHz)
  • 3
  • 3
  • Dynamic Range at 1 kohms load
  • 96.2
  • Dynamic Range with 1 kohms load
  • 94
  • Effective Output Level
  • -40
  • Equivalent noise level at 0dB
  • 1
  • Equivalent noise level at -10dB
  • 4
  • Equivalent Noise Level to DIN 45405(CCIR 468-2)
  • 26
  • 28
  • Equivalent noise level to DIN 45405(CCIR468-2)
  • 26
  • Equivalent Noise Level to IEC 268-4 (A weighted)
  • 19
  • 20
  • Equivalent noise level to IEC 268-4(A weighted)
  • 16
  • Equivalent Noise Level to IEC 268-4(A-weighted)
  • 18
  • Equivalent noise level with battery power
  • 16
  • Equivalent noise level with P48 power
  • 15
  • Frequency Stability
  • 150
  • Headphone Output Impedance
  • 5
  • IEC 268-4(A weighted)
  • 18
  • Input Impedance
  • 50
  • Load Impedance Range
  • 100
  • Low Frequency Roll-off
  • 80
  • Maximum Audio Input Level (1 kHz at 1% THD)
  • 145
  • Maximum Bias Voltage
  • 10
  • Maximum Input (SPL)
  • 145
  • Maximum Input Voltage at 0dB
  • 14
  • Maximum Input Voltage at -10dB
  • 9
  • Maximum Output Noise
  • 42
  • Maximum Output Voltage
  • 4
  • Maximum Output Voltage at 0dB
  • 14
  • Maximum Output Voltage at -10dB
  • 1
  • Maximum Sound Pressure Level
  • 130.5
  • Maximum SPL with battery power
  • 126
  • Maximum SPL with P48 power
  • 132
  • Mic Operating voltage
  • 3
  • Microphone Rating Impedance
  • 150
  • Minimum Input Impedance
  • 20
  • Normal Bias Voltage
  • 1.5
  • Omnidirectional Sensitivity (at 1kHz)
  • -37
  • Output EIA Rated Impedance
  • 150
  • Output Level(at 1,000 Hz) - Open Circuit Voltage
  • -64
  • Output Noise (Equivalent SPL)
  • 31
  • Phantom Voltage
  • 48
  • Power Requirement
  • 48
  • Power Requirements
  • 6
  • Preamplifier Net Weight
  • 4.17
  • Preamplifier Output Clipping Level (1% THD)
  • -8
  • -8
  • Receiver Operating Voltage
  • 5
  • Recommended Load Impedance
  • 1000
  • Recommended Minimum Input Impedance
  • 20
  • Recommended Operating Voltage
  • 5
  • Response Time
  • 1
  • RF Output Power
  • 10
  • Self Noise (typical, equivalent SPL, A-weighted)
  • 19
  • 29.5
  • Selfnoise (typical, equivalent SPL, A-weighted, IEC 651)
  • 14
  • Sensitivity (at 1kHz)
  • 50
  • Sensitivity (at1kHz, 74dB SPL)
  • -55
  • Signal-to-noise Ratio (REC Out)
  • -80
  • SIGNAL-TO-NOISE RATIO (SNR)
  • 95
  • Total Harmonic Distortion
  • 5
  • Total harmonic distortion (THD) + Noise
  • 0.1
  • Transmitter Battery
  • 9
  • Transmitter RF Power Out
  • 50
  • Transmitter Weight (w/o battery)
  • 5.4
  • Typical Output Noise
  • 39
  • Unwanted Signal Rejection
  • 60
  • WHT RF Power Out
  • 50
  • WLT RF Power Out
  • 50
  • Currently shopping by:
  • Cartridge Capacitance: 54
  • Length: 10.98 in
  • Working Range: 100

Filter by:

Clear All