Search
Filters

AC-EX100-UHD-R3 - 100m HDBaseT Tx/Rx with RS-232, IR, Ethernet and EDID Management

To see an accurate total, please select your payment method

The AC-EX100-UHD-R3 is a 100m HDBaseT Tx/Rx with RS-232, IR, ethernet and EDID management.
Manufacturer: AVPro Edge
$369.00

Features

  • 100M (330ft) on 1080P (Cat6a)
  • 3-20v protection circuit built in for safe IR transport
  • 4K60 4:2:0, 4K30 4:4:4
  • Audio extraction: Use the AC-EX100-R3s audio extraction port to distribute audio directly into an audio amplifier or AVR. This gives you the ability to control the audio separately from the video signal
  • Bi directional RS232 Transport
  • Bi-directional Power
  • Bi-directional power: When power at the rack is not an option. For instance, there is simply too many ower supplies, or it is difficult to get to, with The B.A.E. you have the option to power the transmitter from the receiver (your option)
  • Can cascade
  • CEC Pass through
  • Compatible with HDBaseT displays, projectors, AVR's
  • Control: IR and RS-232 are bidirectional and can control the sources from the sinks or vice versa. This allows unlimited flexibility when controlling sinks, and sources
  • Distance: By using AC-EX100-UHD, the transmission distance for HD 1080P is 100meters (330ft) and 4K is up to 70meters (230ft)
  • EDID management
  • EDID management - Select from preloaded EDID's so you can have total control over the active source
  • Edid management: Control the source device with EDID management
  • Ethernet extension: When working with any AC-EX100WPP-UHD-T, AC-EX100TT-UHD-T or AC-EX100-UHD-T transmitter, you gain the ability to extend any network or ethernet signal. With the additional ethernet ports on these extender units you have a bi-direction
  • Ethernet hub - The transmitter and receivers both have Ethernet ports acting as a bi directional Ethernet hub
  • Ethernet hub and extension
  • HDCP 2.2 and earlier
  • HDMI 2.0
  • HDR support up to 4:2:2 12bit
  • I-Pass feature for control system "pass-through IR"
  • I-pass: Plug you Control System emitter ports directly into the IR port on the transmitter (via mono 3.5mm cable) for clean and reliable IR pass through
  • ieee PoE for universal HDBaseT installations
  • Supports 3D
  • Supports uncompressed PCM 2- Ch., LPCM 5.1 & 7.1, Dolby Digital, DTS, Dolby TrueHD, DTS HD-Master Audio, atmos via HDMI
  • Ultra high definition: The length of manufactured HDMI cable is unchangeable after it is made and they are unreliable after about 25ft
  • Up to 70m (230ft) on 4K (Cat6a)

Features

  • 100M (330ft) on 1080P (Cat6a)
  • 3-20v protection circuit built in for safe IR transport
  • 4K60 4:2:0, 4K30 4:4:4
  • Audio extraction: Use the AC-EX100-R3s audio extraction port to distribute audio directly into an audio amplifier or AVR. This gives you the ability to control the audio separately from the video signal
  • Bi directional RS232 Transport
  • Bi-directional Power
  • Bi-directional power: When power at the rack is not an option. For instance, there is simply too many ower supplies, or it is difficult to get to, with The B.A.E. you have the option to power the transmitter from the receiver (your option)
  • Can cascade
  • CEC Pass through
  • Compatible with HDBaseT displays, projectors, AVR's
  • Control: IR and RS-232 are bidirectional and can control the sources from the sinks or vice versa. This allows unlimited flexibility when controlling sinks, and sources
  • Distance: By using AC-EX100-UHD, the transmission distance for HD 1080P is 100meters (330ft) and 4K is up to 70meters (230ft)
  • EDID management
  • EDID management - Select from preloaded EDID's so you can have total control over the active source
  • Edid management: Control the source device with EDID management
  • Ethernet extension: When working with any AC-EX100WPP-UHD-T, AC-EX100TT-UHD-T or AC-EX100-UHD-T transmitter, you gain the ability to extend any network or ethernet signal. With the additional ethernet ports on these extender units you have a bi-direction
  • Ethernet hub - The transmitter and receivers both have Ethernet ports acting as a bi directional Ethernet hub
  • Ethernet hub and extension
  • HDCP 2.2 and earlier
  • HDMI 2.0
  • HDR support up to 4:2:2 12bit
  • I-Pass feature for control system "pass-through IR"
  • I-pass: Plug you Control System emitter ports directly into the IR port on the transmitter (via mono 3.5mm cable) for clean and reliable IR pass through
  • ieee PoE for universal HDBaseT installations
  • Supports 3D
  • Supports uncompressed PCM 2- Ch., LPCM 5.1 & 7.1, Dolby Digital, DTS, Dolby TrueHD, DTS HD-Master Audio, atmos via HDMI
  • Ultra high definition: The length of manufactured HDMI cable is unchangeable after it is made and they are unreliable after about 25ft
  • Up to 70m (230ft) on 4K (Cat6a)
Products specifications
Operating Temperature (Maximum) 51
Operating Temperature (Minimum) 23
Transmission Range 3960 ft
Products specifications
Operating Temperature (Maximum) 51
Operating Temperature (Minimum) 23
Transmission Range 3960 ft